The Schwinn 24 inch Commuting / Touring Unicycle – Chrome pairs retro style with new technology. Schwinn pulled out the blueprints of their classic flat-bladed steel frame to create this unicycle… a bit of retooling, some high quality modern additions, and you’ve got a cycle that’s great for touring, casual riding, or distance trips. This cycle ships with a 350mm seatpost; minimum inseam required is 33 inches. Assembly is required and can be done in 30 minutes or less with the following procedure: Cut seat post if desired, using a hack saw or pipe cutter Install seat post onto frame Place wheel in unicycle frame Attach pedals to crank arms Specifications Schwinn gel saddle with front lift handle 22.2mm x 350mm chromed steel seat post with 4-hole rectangular mounting bracket Seat post clamps in place with Schwinn binder bolt clamp Steel 2-piece mainframe with 40mm stamped main-cap bearing housings 48-hole steel hub with hardened CrMo cotterless spindle, 100mm center bearing to center bearing 14G. Stainless Chrome wheel spokes; 184mm in length for 4x Nimbus 24-inch silver rim, 48 holes, 32mm wide with aluminum double-wall and reinforced eyelets Rubber rim strip 24″ x 2.1″ tube size 20″ x 2.3″ Kendra Kiniption tire 140mm cotterless steel crank arms Plastic pedals with 9/16 threads Approximate cycle weight: 15 lbs. Chrome or Blue steel 2-piece frame. 140mm cotterless steel crank arm. Schwinn gel saddle with front lift handle. 22.2mm x 350mm chromed steel or aluminum 4-hole seat post. 48-hole steel hub w/ cotterless CrMo spindle.
Schwinn Schwinn 24 Inch Retro Unicycle, Blue, Steel, 24 inches
